KORDA RIG BITZ - FROM £1.99
4mm Rubber Bead
- rubber beads
- Perfect for use with the helicopter rig
- Available in brown and green
These were designed for use with our flying back leads. The hole inside the bead is tapered so if it is fished with the larger hole facing towards the rod then it will pass more easily over a leader knot.
The small hole will then rest against the top of the anti-tangle system stopping the large bore of the back leads from sliding down the anti-tangle system which would stop the flying back lead 'flying' back on the cast.
Purely coincidentally, they are perfect for use on the Dark Matter leaders should you wish to fish them chod style and anchor the hook link on one of the two tungsten collars designed to hold the leader down on the lakebed.
They are also ideal for the shokka rig, which incorporates a running inline lead with a back stop set a few inches behind it on one of the leaders or on a length of rig tube
Floss Caps help to efficiently secure your hook bait to your chosen rig.
Many of today’s most popular rigs involve tying baits on to rings or micro swivels with floss, and this can be far more fiddly than it needs to be. The Floss Cap takes all the hassle out of it, replacing your usual boilie stop – with available colours including clear, yellow and pink, so it can be matched to your bait – and once your hookbait is positioned just how you want it on the rig, you simply slide on a Floss Cap so that it sits flush, and then blob the ends of the floss with a lighter to hold everything in place. Tying baits on has never been so neat and hassle-free!
- Compatible with Korda Braid Needle & Fine Needle
- Simply Burn Bait Floss onto the Floss Cap to secure
- No knots required
Available in: White/Red | Pink/Yellow | Clear
- Rounded rubber sleeves for use with a rotary rig
- Streamlined for anti-tangle properties
- Can be used to cover the lead swivel or Kwik Link
- Available in clay, weed, gravel or silt
The Korda Helicopter Sleeve has been specifically designed to cover a Korda Kwik Link when it is attached to a Dark Matter Leader, when using a helicopter or chod style setup. It stops tangles and grips the Kwik Link thanks to its special rubber compound
- Tiny translucent rubber hook beads
- Designed for use with a number of blow-back-style rigs
- Each pack contains 20 beads
- Essential for effective rigs like the Withy Pool rig.
These little rubber hook beads fit tightly onto the shank of all of our hook patterns, and can be used to create a number of effective presentations. They’re perfect for use with rig rings, to create blow-back rigs such as the Withy Pool rig, or even variations of the all-conquering chod rig.
They come supplied on easy-to use sprews, which each old 20 hook beads. The beads are weedy green colour, which helps them blend over most lake beds.
- Small teardrop-shaped metal loops
- Make changing the rig easy
- Fit onto all of our quick-change links
- Can be pulled through PVA sticks
Quick and easy rig changes are a necessary part of carp angling today. The Link Loop has been specially designed to replace the need for an overhand loop in the end of your hook link. The obvious advantage is the increased strength due to the use of a grinner or blood knot used to tie the link loop to the rig, especially when using monofilament or coated hook link materials.
The link loop will fit both sizes of the Stik Klip as well as the Kwik Link. The low diameter steel and teardrop design is easily pulled through all of the Funnel Web system bags, using a baiting needle. As with all our metal products the Link Loops are finished with a non-reflective coating to give the best camouflage possibl
- Metal clips that make baiting with maggots easy
- Sharp point allows you to thread them onto the clip
- Available in four sizes
- Anti-glare PTFE coating
The maggot klip makes baiting your rig with maggots easier than ever. Simply open the klip, thread your maggots onto it and close it up again!
The Klips are available in a range of different sizes to suit your needs. You can therefore thread on as many maggots as you wish. The clasp fastens tightly onto the front of the Klip making it safe and easy to utilise. They are fantastic for outwitting pressured carp throughout the summer and winter period.
We’ve also been experimenting with seeds of hemp on the Klips and it works extremely well when bites are hard to come by or when you’re fishing over a spodded concoction of particle
Micro Rig Swivel
- Tiny swivel with many rig applications
- Ideal for mounting hook baits
- Give your rig more movement
- Anti-glare PTFE coating
From bait attachment, to combi-rig construction, the Micro Rig Swivel has a host of rig applications. It's perhaps most widely used sliding on the shank of a hook, forming the blow-back element of many rigs. Crucially, it has the same non-reflective coating that our other rig components are blessed with, eliminating any glint that might otherwise spook feeding fish
QC Swivel Round
These clever swivels have been designed to make chod-rig fishing even easier. They feature a rounded crook rather than a conventional eye, into which you can clip a looped chod.
To create the loop, you can either tie an overhand loop or crimp a loop into the end. These loops can then be 'clicked' into the loop and won't come out unless you want to change a rig.
The swivels are PTFE coated, which prevents light glinting off, potentially spooking feeding carp.
Supplied in packs of 8
- Super-smooth PTFE coated rig rings
- Perfect for making blowback rigs
- Available in oval shape too
- Sizes include X-Small, Small and Medium
Korda Rig Rings are a crossbreed of the best parts of modern day metal technologies. The silky smooth PTFE coating enhances the effectiveness of rigs incorporating a ring, especially when coupled with Korda PTFE-coated hooks.
Korda rig rings have been specially designed to help the angler create a variety of different rigs for the ever-changing demands required to catch carp today. Available in four sizes and finished in black to aid concealment, the presentation options are almost endless
Run Rig Rubber
- A special rubber bead, designed for fishing with running leads
- Designed to be completely tangle-free
- Available in clay, weed, gravel and silt colours
- Fits over size-eight swivels or ring swivels
Our Run Rig Rubbers have been specially designed for use with running rigs incorporating theDark Matter Leaders, Leadcore, Kamo Rig Tube or Dark Matter Rig Tube. As you'd expect from Korda, these are like no other running rig beads available. It was while fishing at long distance on a running-rig-only water that Danny came up with this new idea.
A shoulder has been angled on the rubber at 30 degrees, this means the Big Eye Swivel holding the lead sits at a much better angle than any standard running rig setup, this will not only minimise the chance of any tangles but will also help get those extra few yards when fishing at long range.
The soft rubber compound is designed to hold the swivel and rig tube securely
- Easy and Quick to steam
- The shrink tube will fold under excess pressure to prevent any damage to the carp
- Korda Shrink Tube is perfect for improving the hooking efficiency of any hook
- It shrinks down to 1/3 of its original size to form a really neat presentation.